Essential Daily Check to Reduce Failure Rate of sludge dewatering Screw Press
No matter what kind of equipment, after we use it, there may be a variety of failures. If we can’t deal with it, it will have a serious impact on our use. In order to avoid this situation it happened, so we need to do a daily inspection of the volute screw press.
The daily check of Volute screw press is actually mainly checked from the following aspects:
- Motor: We must check whether the motor can run normally, whether there is abnormal noise and vibration during operation
- End plate: see if the gap set by the end plate is appropriate and whether the moisture content of the de-cemented cake has a large change in use
- Screw chamber: This is to check whether the solid content of the filtrate is abnormal
- Check whether there is sludge accumulation around the return pipe of the measuring tank
- Whether a suitable alum flower is formed in the flocculation mixing tank
These are the daily inspections that we need to carry out on the volute screw press. If you do these, you can greatly reduce the failure rate of the sludge dehydrator.